Ducati Single Dry Clutch Kit

<< back to products

The Ducati Single dry clutch conversion comprises of a set of straight cut primary gears with the same ratios as the wet clutch version.  Also a driving plate and aluminium clutch drum are supplied with ball and needle roller bearings for support.   The clutch plates are an extra £150 for a set of bronze and steel plates, though these are a considerable improvement on the standard plates. A replacement clutch centre and spring pillars are also available at additional cost.

 

The clutch cover is machined out of billet aluminium and supplied with a foot guard.

 

NOTE: The kickstart facility cannot be used with the dry clutch fitted.

 

NOTE: The standard clutch centre (replacement available), pressure plate and springs are retained

 

NOTE: The dry clutch can only be fitted in conjunction with our close ratio gearbox, for which a longer input shaft is required.  This is supplied as standard if ordered with a  gearbox.  If you already own a Nova close ratio gearbox the longer input shaft required at extra cost.

 

To find out about availability or to order this product or for further information please click here

 

Price: £750 + VAT (if applicable) & Carriage

 

Dry Clutch Input Shaft (for existing Nova gearbox customers) £195.00 + VAT (if applicable) & Carriage

 

Clutch Centre/ Pillars £150 + VAT (if applicable) & Carriage

 

Sintered Bronze Clutch Plates £105.00 + VAT (if applicable) & Carriage

 

Thicker Steel Clutch Plates £45 + VAT (if applicable & Carriage)

 

	Nova Ducati Single Dry Clutch Kit Shown With Optional Clutch Plates and Clutch Centre

	Nova Ducati Single Dry Clutch Kit Fitted